How a Ram Pump or Hydraulic Ram Works

How a Ram Pump or Hydraulic Ram Works

_What is a Ram Pump?

_A water pump that will indefinitely move water from one area to another without using external motors for power.

_What Are Its Uses?

_Moves water without the use of electricity or gas, and operates without intervening human force to persistently operate. The pump Requires no outside source of power other than the kinetic energy of flowing water.

_Moves water from low-lying areas to areas of significantly higher elevations above the initial waterline.

_Reliable and consistent flow of water to agriculture or fill tanks.

_Easy To Build.

_How Does The Pump Work?

_The pump takes in water at a consistent flow and pressure, and outputs water at a higher pressure and lower flow rate; causing the output of water to exceed the height of its initial waterline. The pump utilizes the potential of flowing water to transform the initial flow energy to a higher pressure output.

_The pump utilizes “water hammer effect” to develop an oscillating pressure from the initial water input; to power the pump. This water is fed into two opposing “one way valves” to initiate a subtle implosion that is regulated by the self pressurized air chamber to drive the output flow.

_Kinetic energy and pressure oscillations are the mechanisms that drive the pumps self power; utilizing reverse forces to its advantage.

_What Are The General Factors Of Power?

_ Assuming 100% efficiency: For every 10 Liters of water with the potential energy of 10 Meters; Transforms 1 Liter of water with the potential energy of 100 Meters upward.

_1*10*100 = 10*10*10